January | 2015 | Torich International Co.,Ltd Blog

Home » 2015 » January

Seamless Square Steel Tubes Cold Drawn Processing executive standard specification sheet, and the difference between general purpose

January 13, 2015 skwangSpecial Shaped Steel Tubes

Seamless pipe, steel square is four angle, by cold drawing seamless tube extrusion forming of square steel tube, seamless tube and welded square tube is essentially the difference. Steel pipe is hollow section, used as a large number of fluid transporting pipeline. Basic introduction: Compared...

Application prospect, ASTM B167 Nickel-Chromium-Iron Alloys Stainless Tubing identification method, mode of production and trade situation

January 12, 2015 skwangStainless Steel Tubes

Stainless steel pipe is a hollow round steel bar, are mainly used in petroleum, chemical, medical, food, light industry, mechanical instruments and other industrial pipes and machinery structure parts. In addition, the bending, torsional strength is the same, the weight is light, so it is...

Alloy Steel Pipe profile, meaning, mechanical properties and operation

January 9, 2015 skwangAlloy Steel Tubes and Pipes

Alloy steel pipe is mainly used for power plant, nuclear power, high pressure boiler pipe of high temperature and high pressure, high temperature superheater and reheater and so on and equipment, it is made of quality carbon steel, alloy structural steel material and heat resisting...

The basic situation, function introduction and identification method of Steel Rectangle Tubing for Construction application

January 8, 2015 skwangSpecial Shaped Steel Tubes

Rectangular tube is a hollow rectangular steel, also known as flat tube, flat square or square flat tube (Gu Mingsiyi). Widely used as the pipe for conveying fluid, such as oil, gas, water, gas, steam, in addition, the flexural, torsional strength is the same, the...

EN10216-2 Steam Boiler Tubes for Pressure Vessels basic information, the classification as well as the reference standard

January 8, 2015 skwangBoiler & Heat Exchanger Steel Tubes

Seamless steel tubes for low and medium pressure boiler (GB3087-2008) is used in the manufacture of various structure of low and medium pressure boiler superheated steam pipe, superheated steam pipe, boiling water pipe and locomotive boiler flue tube, small pipe and brick arch tubes of...

Installation and use of High Pressure Oil Tubes for Diesel Engine and the main points of using

January 7, 2015 skwangStructural Steel Tubes and Pipes

Diesel engine with high pressure tubing (GB3093-86) is the manufacture of high-pressure diesel injection systems for cold drawn seamless steel tube. Usually the use of thick wall pipe, 6X2 pipe, the material for the 20# steel or 45#. By forging forming, with the fastening nut....

Introduction and the merits of EN10305-4 Precision Steel Tubes Hydraulic Systems

January 7, 2015 skwangSeamless Precision Steel Tubes

SSAW: is a strip coil as raw material, often warm extrusion molding, spiral to the automatic double wire submerged arc welding process double-sided into pipe joints. Characteristics of submerged arc welding pipe: straight seam welded pipe production process is simple, high production efficiency, low cost,...

Cold drawn precision seamless steel tubes of simple introduction and service life

January 4, 2015 skwangSeamless Precision Steel Tubes

Introduction: technology to precision cold drawn seamless steel tube by grey or black phosphating process, precise hydraulic seamless steel pipe of steel pipe after phosphating and closed and antirust processing and made. The phosphating layer of dense inner surface and the outer surface of the...

M	T	W	T	F	S	S
« Dec				Feb »
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Seamless Square Steel Tubes Cold Drawn Processing executive standard specification sheet, and the difference between general purpose

Application prospect, ASTM B167 Nickel-Chromium-Iron Alloys Stainless Tubing identification method, mode of production and trade situation

Alloy Steel Pipe profile, meaning, mechanical properties and operation

The basic situation, function introduction and identification method of Steel Rectangle Tubing for Construction application

EN10216-2 Steam Boiler Tubes for Pressure Vessels basic information, the classification as well as the reference standard

Installation and use of High Pressure Oil Tubes for Diesel Engine and the main points of using

Introduction and the merits of EN10305-4 Precision Steel Tubes Hydraulic Systems

Cold drawn precision seamless steel tubes of simple introduction and service life

Recent Posts

Archives

Categories

Tags

Meta