Seamless Precision Steel Tubes
Home » Products » Seamless Precision Steel Tubes » Seamless Hydraulic Steel Tube and Tubing
Instruction
Applications:
for hydraulic and pneumatic power systems
Size range:
O.D.:6-80mm W.T.:0.5-12.5mm L: max12000mm
Seamless Tteel Tubing Manufacturing Process:
Steelmaking process:
The steelmaking process is at the discretion of the manufacturer
Steels are fully killed.
Tube manufacturing and delivery conditions:
The tubes are manufactured from hot finished seamless tubes by cold working.
Cold working is also applicable when actual production is needed.
Tubes are delivered in the delivery condition +N , means that after the final cold drawing operation, the tubes are normalized in a controlled atmosphere.
Tube appearance:
Both internal and external surface finish of the tubes smooth after cold forming as well as after Normalized Heat treatment, Surface quality would be without ridges, dents or shallow grooves.The tube have smooth outer and inner surfaces with a roughness Ra≤ 4μm
A reduced roughness of Ra ≤2μm is workable for inner surface, the best ID roughness we could reach 0.4-0.8 μm only by cold drawing.
Steel Grade and Chemical Compositions:
Steel Grade | C | Si | Mn | P | S | Al | |
Steel Name | Steel Number | max | max | max | max | max | min |
E215 | 1.0212 | 0.1 | 0.05 | 0.7 | 0.025 | 0.025 | 0.025 |
E235 | 1.0308 | 0.17 | 0.35 | 1.2 | 0.025 | 0.025 | - |
E355 | 1.058 | 0.22 | 0.55 | 1.6 | 0.025 | 0.025 | - |
Permissible deviations of the product analysis from the specified limits given in Table 1 | ||
Element | Specified limit of the cast analysis % by mass | Permissible deviation of the |
product analysis % by mass | ||
C | ≤0.22 | 0.07 |
Si | ≤0.55 | 0.05 |
Mn | ≤1.60 | 0.1 |
P | ≤0.025 | 0.005 |
S | ≤0.015 | 0.003 |
Al | ≤0.025 | 0.005 |
Mechanical properties at room temperature | ||||
Steel Grade | Yield strength a ReH min Mpa | Tensile strength a Rm | Elongation A min % | |
Steel Name | Steel Number | min Mpa | ||
E215 | 1.0212 | 215 | 290-430 | 30 |
E235 | 1.0308 | 235 | 340-480 | 25 |
E355 | 1.058 | 355 | 490-630 | 22 |
Test methods:
Tensile test
Flattening test
Drift expanding test
Dimensional inspection
Visual examination
Leak tightness test
- CONTACT US
- Mobile: 0086-(0)137 3616 4628
- Tel : 0086-574-88255925
- Fax : 0086-574-88086983
- Email : sales@steel-tubes.com